Project Posey Plunging Neck Line: Rise of Demons

I think I might be getting some tendinitis in my elbows from all of this typing as of late.  I will be relieved once all these Halloween tutorials are out the way and I can get back to my wildlife posts.  Suspect some of you are getting a bit upset with all the build projects.  Bear with me, just a few more and we’ll be set to close it out with the actual trail itself.  Let’s not get out in front of our headlights.  Today I would like to introduce the latest Posey line – the Plunging Neck Line.  Pretty clever there eh, I’ll explain the pun in a bit (and I meant it to be two words).

Went with two versions on the trail this year.   High Priest Demon.

Project Posey Be Bulking 2017

And Druid Demon.

Project Posey Be Bulking 2017

Last year I brought you the Westworld Line (link here).  This line doesn’t have the animation element (well, at least not yet), but it did fix an ongoing issue I’ve struggled with since the early Posey lines.  What to do about the neck.  It always seem like they stuck out too far and it just didn’t look the way I wanted it to (link here).  Finally got a solution to that problem in my updated line.  Might as well take you through the whole process for my two new Demons.  It all started with two masks I fond on Amazon.  Full over the head masks and fairly decent price point.  All I needed to add was a pipe to use as a neck bone and some tubing.

Project Posey Be Bulking 2017

Hit the jump to see how these two Demons progressed on their trek to make it onto the Haunted Trail!

Continue reading Project Posey Plunging Neck Line: Rise of Demons

Project Zombie Dancing

I am beginning to think it takes the same amount of time to prep and complete these Halloween tutorial posts as it does to actually make the prop.  Feels like I have been typing for days and still have a number of props to get through from this year’s Haunted Trail of Tears event. If I can’t take the time to give thanks to those who gave me inspiration and give back to the haunt community, then I should just pack up my motors and find something else to spend all my free time on.  So, today’s featured decoration that made its debut on our Halloween trail this year is my dancing zombie.

Zombie Animatronics for Halloween 2017

Typical for first year props, there were some difficulties with this on the trail.  Due to an unforeseen design error, we had to turn this prop off about midway through the night.  I’ll explain more on that towards the end where I’ll give some recommendations on improving it for next year.  First off, I need to give a shout out to two haunters that helped inspire this project.  The first is SoulsOfTheForsaken.  He put up a tutorial on YouTube showing how they put their animated zombie together (link here).  This was the base for my idea.  Then thanks to another tutorial also put on YouTube, I was able to leverage a slightly different linkage system and still get the motion I wanted.  Again, thanks to Hawthorne Manor Haunted House for their rotating skeleton video (link here).

First task was to get the Hawthorn linkage working.  Rather than go through the huge amount of design and build hours it took to get to this point, here is the starting structure.  Note the use of the cross connectors  at the top.  I leveraged the bushings approach used in my other PVC animations to get a nice smooth circular motion on the cross bar.  The 3D printed bushings allow the smaller 3/4″ pipe to stay centered and move fluidly through the 1″ cross connectors.  Now just needed to connect a 1/2″ pipe at the center of the crossbar.  This provides a pivot point to move about while the vertical bar is rotated from the bottom in a circular direction thanks to the wiper motor at the base.  I did put a connector on the down pipe so I could easily get it on and off the wiper motor arm – you do not want a lot of play in that or it will slip off – a straight coupler would have been fine, but had the T connector laying around, so just used that.  Lastly, I put a 1″ pipe U structure above it with the intent of that keeping the cloths out the mechanism and kind of mimic shoulder structure.

Zombie Animatronics for Halloween 2017

Hit the jump to read about how this new Haunted Trail prop came to be!

Continue reading Project Zombie Dancing

Project Free Hugs

Somewhere in the dark recesses of my mind lives a Halloween idea generator that quite frankly scares the crap out of me.  Not exactly sure how that haunted niche in the brain came to be, but it’s there.  For most the year I keep it suppressed, held in check by the willpower of goodness and strength of ever embracing decency.  I say “most of the year” because there is a time when shadows stand guard as unearthly creatures join in allegiance to break the chains of civility and let evil thoughts deliver punishing waves to my sanity.  This sinister rip in the fabric of time has a name and it is called October for it is here when the mind fills with devil spawn ideas such as this.

Project Free Hugs Clown Halloween 2017

It is something about October training runs that bring up the most god awful concepts.  It may be the exhaustion brought on by the long race season or the long nights fretting about not having enough time to prepare for that year’s Haunted Trail of Tears.  I’ll be lost in my run, entranced by the sound of my shoes pounding the pavement and then it hits like a twitch right before you fall back on your chair.  An image will appear, clear, detailed and mortifying.  My reaction equally immediate, decisive and well, a bit disturbing.  “I have to reproduce that for next year’s haunted trail!!!”  And that sets forth a year’s worth of planning, material gathering and building.  You happen to be looking at the product from last year’s evil concept – and yes, it did make its debut last month on the Haunted Trail of Tears.  The following is a quick summary of how this all came to be.

Hit the jump to see how it all come together if you dare!

Continue reading Project Free Hugs

Project Halloween Hummer

Had a great dinner tonight with great friends to the point I’m completely stuffed. Normally I would tie on some running shoes and run off my overindulgence.  Alas, I’m laid up for about 7 more days – fall back plan, I’ll be skipping some meals tomorrow.  Being as I’m basically just sitting around watching the Illini basketball team figured there was no reason to not be productive in some manner.  Hmmmm, what to do, what to do.  Oh, I know, how about showing off this year’s addition to the Halloween pumpkin collection.

Halloween Pumpkin Collection Addition 2017

This is a bit of a departure for me.  Normally I tend to play in the darker side of Halloween.  Ghouls, goblins, demons and other haunting topics have been the go to choice for my pumpkin slashing.  Maybe I am getting soft in my new life phase north of 50.  I suspect this is a natural reflex having immersed myself in all things evil for my Haunted Halloween Trail (yes, I’ll be recounting that project soon) – just a karma correcting action to keep myself grounded in sanity.  Regardless, it is what it is – my latest offering is for the birds – Hummingbirds to be exact.  I wanted something in the birth theme this year.  Started out looking at Owls, but then stumbled on a number of nice Hummingbird outlines.  It is no secret I hang out in tattoo and stenciling forums to get my creative ideas for pumpkin carving.  Before I go any further, DISCLAIMER: the rights to the original templates used for my pumpkin pattern remain with the author.  I am only using these for non-profit personal use.  Hummingbirds are a very popular theme for tattoos.  If you want to waste a day, start googling for bird tattoos and start perusing the massive number of returned hits (warning, expect nudity to be in those returned images).  I had already captured a collection of nice Hummers for a project I was considering previous to this.  Just went back to that collection and picked out three designs that I thought looked cool and were carve friendly.  Only thing missing was a nice flower to tie it all together.  Turns out there was a nice flower stencil already in that collection (came as a side decoration to one of the Hummer designs).  Key was to have at least three flowers that I could align my bird designs to.  Worked them up in Paint Shot Pro, positioned and flipped the birds to align with the available flowers and presto… pumpkin design.

Halloween Pumpkin Collection Addition 2017

Hit the jump to learn more details about this traditional Halloween project.

Continue reading Project Halloween Hummer

Yellow Throat of Georgia

Rumors of my demise are greatly exaggerated!  Granted I have been lax on my wildlife posts, but there is a good reason for that – namely I have been busy busy busy.  Halloween has now wrapped up, which means I’m on the clock to get all the haunted trail and prop making blog posts out .  Add to that some medical procedures to recover from and the accounting year is winding down at my day job which means extra time to get loose ends straightened up before the holidays hit. Of course, these are still not good enough to warrant keeping my loyal wildlife readers devoid of fodder.  With overwhelming guilt I bring you today’s featured bird!

Yellow-Throated Warbler Shot in Georgia May 2015

Before the hate mail starts pouring in, I realize this isn’t my best work behind the shutter.   These images are a bit soft likely due to the brief window of time available to get any shots of this interesting bird.  These are the only three shots that made it into the tin on this encounter.  This specimen was located on our Georgia Birding Trip back in May 2015.  If it wasn’t for the  high pitch call emanating from high above in the pine trees I would have never found it.  I’d zero in on the call, get The Beast pointed in the general direction only to find that the sound was coming from another area in the trees.  Repeat process, repeat results.  All of sudden, a bird popped out in the opening.  Got the camera on point, snapped two shots and a final one as it moved off through the branches – that’s it.  One chance, three quick images and birdy went bye bye.  It is amazing how many times this plays out on our birding trips.  A few minutes before that or a few minutes after that and you wouldn’t even know the bird was even in the area.  People ask me if birding gets boring – definitely not – when you consider these brief encounters during the course of a day’s outing, think of how many chances you missed, how many different species you might have seen or what was simply sitting in the tree quiet as a mouse just laughing at your inability to find it.

Yellow-Throated Warbler Shot in Georgia May 2015

This happens to be one of those times where the excitement of the experience wasn’t truly appreciated until many years later in the digital darkroom.  The original encounter was cataloged as another Yellow-Rumped Warbler.  Better understanding of the difference in songs should have given a clue, but that is a definite weak spot in my game.  Both are fairly high pitched in their song and their color palette is remarkably close.  A lot more details surfaced when processing the RAW images.  Like the Audubon variety of the Rumped, they both had yellow throats.  What caught my attention was the extra white and black patterns of the head.  A quick look at my reference collection confirmed this was not a Yellow-Rumped Warbler, rather a Yellow-Throated Warbler.  Let’s all take a moment to celebrate another check on my birding list.  By then I was kicking myself the pictures didn’t come out as crispy as desired.  On the positive front, at least they were good enough to properly ID the bird – was also able to confirm it with my brother Ron.  Fingers crossed he doesn’t already have one so I can get a little closer to his current count.

Yellow-Throated Warbler Shot in Georgia May 2015

Being that this is a new bird, how about we jump over to Cornell to see what interesting things they have to say about it.  This is a Warbler who calls Southeast US home in the summer.  Confirms with our shooting location and the time of year.  It is also considered a canopy bird preferring to hang out in the upper sections of pine trees.  Well, we can definitely confirm that based on the pictures and how sore my neck was after the encounter.  Prefers insects and spiders which means it is dear to me – based on my short time in Georgia, anything that might dent the population of No-See-Ums down there is tops in my book.  Cornell is pretty sparse beyond those few tidbits.

Again, sorry about the quality of picture on this set.  These hyper warblers are always a struggle to freeze.  Hope you enjoyed my new addition to my North American Birding List.

Save

Project A Better Grabber

Currently laid up a bit due to some outpatient surgery yesterday.  Good news is the only physical requirement to blog is to simply be able to bang out words on a keyboard.  Fortunately, the knife didn’t impact my ability to type so I can spend my downtime being more attentive to my loyal readers!  Yesterday (also in recovery mode) I featured a new project for this year’s Haunted Trail.  Actually, this year brought a large number of new features each of which will likely make their way here in the not too distant future.  In fact, let’s go ahead a feature another new element – this time an animated decoration.

Scenes from The Haunted Trail of Tears 2017

Yes, folks, another ground grabber.  If you recall, last year I took my first attempt at one of these (link here).  This year I wanted to improve upon that design and deliver a better product.  I had been seeing a number of designs on the web (thank you Pinterest) and opted to work off a template from Yard Haunt (link here).  I liked the fairly basic design and really liked the effect.  Of course, I have to extend and improve upon it – it’s my nature.

I knew I needed a frame to rest the arm on.  The Haunt plan used a block and what looked like nails to contain the arm itself.  My preferred medium is PVC so clearly we needed to start there ha.  There is always a struggle trying to find flat endcaps.  Places like Lowes have gone to rounded tops which are useless when you want to fix them to a board or piece of plexiglass.  Menards tends to have the flat ones when they actually have them in stock.  Knowing how much of a pain that option was, it was time to spend some time in the PVC aisle and figure out an alternative.  The results of that noodle time …

Project Grave Grabber Halloween 2017

Hit the jump to read about how this all went together!

Continue reading Project A Better Grabber

Project Alford B Bach

Moving through November at a rapid pace.  The good news is the delay in posting is due to spending some serious time in the digital darkroom to work up a number of posts from this year’s Halloween projects and the culmination into the Annual Haunted Trail of Tears.  Now I just need to bang out some accompanying words and fire up the blog posting engine. I have already posted one of the new decorations for this year – the zombie silhouettes (link here).  Next up, my first tombstone.

Project Alford B Bach Tombstone Halloween 2017

I am going to admit right up front that I didn’t get to finish all the planned steps on this project before the day of the Haunted Trail.  This particular project was slotted further down the to-do list behind other haunted trail tasks that ended up taking way longer than expected.  Most of the work was done after midnight when the other to-do list items were wrapped up for the night.  Live on the edge, use power tools when you are exhausted and half awake.

As I hope you assumed, this tombstone is not actually made out of stone.  The haunting forums are full of projects leveraging the thick 4×8 sheets of insulation panels.  They are very easy to work with and best of all, weigh very little.  I picked up a 2″ thick sheet.  Two things to know about the insulation panels – well, at least the one I picked up.  First, mine had tiny scores in it I didn’t see when I was looking at them.  Guessing this allows them to cut to standard lengths easily, but for our use, results in a stress point.  The second one is they are surprisingly expensive.  The 4x8x2 one I opted for was $26.  Putting that in perspective, a 4×8 sheet of 3/4 wood treated underlayment was only $14.  Trading ease of working with for cost.

Project Alford B Bach Tombstone Halloween 2017

Hit the jump to read about all the steps in building this year’s addition to the Haunted Trail.

Continue reading Project Alford B Bach

Heavy Medal

Halloween is nearly upon us!  If the day itself isn’t scary enough, the fact that it is officially the last day of the month sends shivers down my back as I have to check my quota for the month – 1, 2, 3, 4, 5 … whoa.  It appears I am down a post and my fears are realized.  Normally this would be more of an issue, but to be honest, I already had the topic and the related images worked up. Just needed to put some letters together and punch my ticket to the next month.

With the close of the month, thought it was fitting to feature the close of the 2017 race season.

WhiskeyDaddle Race 5K and Half Marathon Oct 7th, 2017 Peoria IL

The WhiskeyDaddle was held the weekend of October 7th in downtown Peoria, IL.  Technically this was a new race for me and the inaugural running for this event.  In actuality, this was more of a rebranding of an existing race than an entirely new one.  I had run the previous October PNC Marathon races a couple of times opting for the half distances each time.  The race coordinators (Shazam Racing) decided to transition this race to the WhiskeyDaddle to give a local flavor to the event. If you did not know, Peoria played a large part in the prohibition years in relation to the local Whiskey distillery.  The race now has a Whiskey theme to it and they changed the course up a bit.  Now you start in a different location and end on the river front instead of the civic center.  I like to think I had something to do with that having completed several surveys encouraging them to move the finish line to a new location – absolutely no reason to waste the money to end there – the seats were mainly empty and it felt like a morgue. In addition to making the slight course change, they also added a pre-race 5K similar to the Illini Marathon.  Compete in both and you get a third medal.  If you know me, you know there was no way I was going to pass up the opportunity to get THREE medals.

WhiskeyDaddle Race 5K and Half Marathon Oct 7th, 2017 Peoria IL

Hit the jump to learn how this race turns out.

Continue reading Heavy Medal

Different but the Same

As of last night, my busy October is now officially over.  Most of that was taken up with our own Haunted Trail efforts which consumes my mornings and nights and everything in between and a number of races to close out the official run season.  That gives way to some additional Halloween parties where we get to enjoy the Halloween labors from our friends.  Two of those closed up this weekend leaving my calendar fairly free beyond a garage full of decorations that need to put away for next year (some of them are still drying out from the multiple days of rain they had to endure before finally getting them all pulled out of the woods).  The last critical task for the month is to complete my blog quota and then we’re ready for whatever November has to offer.

Since we talked about the Yellow-Rumped Warbler in my last post figured it made sense to provide an immediate contrast with the other sub-species of this colorful bird.

Yellow-Rumped Warbler - Myrtle shot on Wisconsin trip April 2014

As mentioned previously, there are two main classifications of the Yellow-Rumped.  The one we covered in the last post was the Audubon variety as noted by their full yellow throat.  The other variety is the Myrtle which you are viewing here.  Yes, it has the yellow shoulder patches and the yellow crown in similarity with the Audubon version.  And it pretty much goes without saying that it too sports the yellow patch on the rump.  This wasn’t very easy to tell in the previous Audubon series, so let’s correct that now.

Yellow-Rumped Warbler - Myrtle shot on Wisconsin trip April 2014

Hit the jump to see and read a bit more about this sun painted Warbler.

Continue reading Different but the Same