Project JigIt: Failure Leads to Invention

So, long time followers of Intrigued should already know my kryptonite is failure. It literally gnaws at my core until something is done about it. Pretty much three paths lead from such events – train harder/get better and get ‘er done, find a better way to accomplish said feat or, unfortunately, find myself in the hospital. Come to think of it, there is really only two paths as the last one just starts the cycle over again. Not sure of the exact moment this infliction came to be, but likely a result of being undersized in every sport I ever participated in and a father (who was also undersized) that wisely knew the ramifications of letting someone get the better of you and not picking yourself off the ground. This being an over-dramatic intro for one such failure, albeit one of a harmless nature. What you see in this next shot is the results of “find a better way” after a disappointment.

A bit of background. For the 2019 Halloween Haunted Trail (link here), I had designed a new prop to add to the cemetery. The intent was to have a coffin being half exposed from the ground being pulled out by a group of skeletons. Prop building for the big event starts months in advance in order to get it completed prior to the chaotic mess that occurs during setup. I picked up the foam sheets to make the coffin out of in April and went right to work on cutting out the pieces. The top and bottom were supposed to be easy as they were straight cuts. Not the case, as my hand would waver on the long cuts – the foam was no match for the hot blade of the gun and happily obliged a wayward cut. Slowly the coffin size got smaller and smaller as I tried to correct the bad cuts.

Project Foam Cutter Jig

Hit the jump to read about the solution to an annoying failure.

Continue reading Project JigIt: Failure Leads to Invention